General

• Breaks down and removes carbon and varnish deposits, oil decomposition products, and wear particles from mechanisms\
• Cleans hydraulic lifters
• Increases oil service life by 10-20% by reducing non-drainable residue by more than two times\
• Does not clog the oil receiver
• Contains components that restore the elasticity of cuffs and seals
• Does not contain solvents and is safe for rubber products and paintwork of the oil pan
• Compatible with all types of motor oils
• Recommended for every oil change, oil type change and service intervals exceeded
• Recommended for engines with mileage over 50,000 km

Specifications

• Product type: oil system flush
• Application area: engine, oil system
• Nature of procedure: before oil change
• Engine types: classic, boxer
• Fuel type: gasoline, diesel fuel
• Car mileage: from 50,000 km
• Positioning: switching to another type of oil, gentle cleaning
• Type of container: PET

Long-term additive for adding to engine oil 150–200 km before changing it. Prepares used oil for replacement, gently affects deposits and removes them.

Storage conditions

Store in a vertical position at T ±30º away from fire sources and hot objects

Precautions

Flammable. Caution. In case of contact with eyes or skin, rinse with plenty of water. Keep out of reach of children.

Composition according to label

Basic hydrocarbon solvent, dirt dispersant, functional detergents

Application

1. Warm up the engine to operating temperature.
2. Pour the additive into the oil filler neck and start the engine.
3. Let it idle for 5 minutes, then you can start driving the car. When operating a vehicle with the additive, limit the load on the engine.
4. After 150–200 kilometers, change the oil and oil filter.