General

• Adhesive lubricant
• Restores elasticity of seals
• Protects the chain from shock loads
• For high-speed motorcycles
• For paved roads

Technical specifications

• Product type: lubricant
• Application area: chains
• Motorcycle type: sport
• Operating principle: anti-friction
• Application: motorcycle chain
• Base material: synthetic
• State of aggregation: gaseous
• Container type: aerosol

Red synthetic lubricant of the new generation is designed for chain drives of sports and racing motorcycles. Protects the chain under conditions of increased load and competition. The red color allows you to control the application and residual amount of lubricant after the rides. Additives that increase adhesion keep the lubricant on the chain at speeds above 250 km/h in any weather.

Before treatment, clean the chain from traces of old grease and dirt using Chain Cleaner Ln7701. Shake the can thoroughly before use.

1. Apply a thin layer of product to the inside of the chain, turning the wheel slowly for maximum penetration.
2. Allow the product to dry for 10-15 minutes, after which the protective properties will reach their maximum.
3. After lubrication, wipe the chain with a dry cloth to remove excess lubricant.
4. It is better to carry out maintenance AFTER the ride, when the chain is warm.

For best results, use at a container temperature above +14°C. Avoid contact of the lubricant with the brake mechanisms!